The final stage of assembly is to build four of the stadium corners, shown in the photo on the left, and attach them to the stadium sides and ends.
Click on any photo on this page to zoom, and click again to see the full-size image.
Initially, layout and assemble the corner supports shown in the photo on the left.
Handy Hint A4 explains how to join together a purple connector and a blue connector, to make the "3D" blue/purple connector shown at the top of this photo.
Then, use the corner supports to connect one of the stadium sides to one of the stadium ends, as shown in the photo at the top of this page.
The photo on the left shows how the small assembly consisting of three yellow rods and two green connectors (highlighted with purple arrows in this photo) helps tie the corner support to the adjacent side and end.
Now complete the other three corners, so that your completed stadium looks like the photo on the left.
If you have any problems with any aspect of these assembly instructions, please email us. Many thanks.